You can solve the Gutter problem by using these simple techniques. You would require basic tools and some materials which you can find in the local store easily. The fixing helps you to keep your Gutter in the good shape and avoid a problem such as water leaking, overflow, damage and ceiling leakage at the time of heavy rain.
The most common reason for the gutter problem is the timely cleaning. The maintenance of the Gutter regularly is essential to keep the material intact without allowing them to rust.
The rusted gutter funnel can break or tear anytime if you do not take care of them. The blockage is another reason which causes the gutter to overflow in rainy seasons. You should clean your gutter before the rainy reason to allow the water to flow smoothly through the Gutter pipe and reach the ground. Water blockage can damage your rood and it might cost you extra money to repair.
The weight of the store water in the room can leak the water inside your home. In the worst case, the ceiling can get brick due to the heavy weight of the water. Timely repair and regular maintenance of the Gutter system will avoid the bad condition.
Here are some of the problems and their solutions to fix your Gutter system.
1) Loose Gutters: The loose Gutter system is the most common problem you will face. The Gutter system will be mounted by using the bolt or the screw. The bolt gets old or due to a rusting problem it weakens. The bolt or screw unable to hold the weight of the gutter system and over the period of time, you will see hanging the Gutter system.
The fix for this problem is very easy. You can have another bold or screw at the place and replace the old to mount the Gutter system back to the position. While repairing check another screw as well for any damage. Other might also get the rust and it might break in the rainy season.
2) Slip Joint: Sometimes the Gutter system gets damage in the middle of the section. If such incident happens then you do not need to replace the whole section. Just have a patch at the broken place and joint them. It works the seamlessly without having any trouble. You may find the slip joints at the local store.
Generally, the hardware store sells the slip joints with the whole system. You can keep them in the storage for the future use.
3) Water Overflow: Some home has long sections of the valley which carry a lot of water int he rainy season. The high velocity of the water can fill the section instantly and the water can start dripping from the top. Normally, the diverted section gets the overflow problem as roof water is diverted to the section. It starts to overflow from the section you will experience the waterfall in the section.
To solve this problem you can fasten the diverted with a sheet metal using screws. Fix it on the outside edge of the gutter to restrict the water from falling directly from the top. It will put the water in the gutter and diverted to the down.
4) Sidewalk in the Way:
You can use the Sidewalk at the end of the downspout and move the water to the place where it can easily get observed in the ground. However, there is no perfect solution to fix the problem, but Sidewalk can mitigate the problem at large scale. It rolls out when it gets filled with the rainwater and put the water at your designated area.
Once it stops receiving the water, it automatically turns back and rolled to its normal position. The solution might not fit for all the house. The sidewalk helps to keep your landscape safe and avoid it from washing away during the heavy rain.
5) Rusting Metal Gutters:
Most of the old pattern gutters were used to made from the metal. If you still have an old gutter system then rusting of the metal will be the common problem. Gutter starts leaking when the metal gets rust and it creates small holes in the gutter.
If your gutter is still in good condition with small damages then you can choose for having the quick fix by using the roof and gutter repair tape. You can easily find the tape in the local hardware store. The tape is especially media with the special material to fix the small holes and leakage on the roof.
Clean the gutter properly removing the debris. You can also use carbon paper to remove the rust to make the inside metal smooth before applying the tape. Once you are done with the cleaning. Use the water to remove any particles from the gutter and leave for a few hours in the sun to dry the water. After few hours you can start applying the tape and fix the leakage problem.
Follow these steps and solve your gutter problem. Remember maintenance is required to keep your gutter system intact all the time.
